Ceramic Pro 9H
Ceramic Pro 9H is our flagship product in the automotive industry.
9H offers a permanent nanoceramic protective protection against minor scratches, graffiti, dirt, aging, premature oxidation, weathering, road salt, rock chips, bugs, bird droppings and even acid rain. It offers excellent scratch, thermal (1382 degrees), UV, oxidation, corrosion and chemical resistance.
A surface that has been sealed with Ceramic Pro 9H stays clean for a longer period of time due to its smoothness and hydrophobic qualities. Ceramic Pro 9H is permanent and can only be removed using machine polish. The unique formulation of 9H has enabled it to be multi-layered which means the thickness of the coating can be increased with additional layers allowing a thicker/harder film that will increase its scratch resistance.
Why ceramic pro on my vehicle?
Good investment
The coating will protect the vehicles exterior and interior from deteriorating for a lifetime. The resale market value will therefore be substantially higher!
Looking new all the time
Once the coating is applied you will see a mirror effect, glossiness and color depth, incomparable to anything else! With proper maintenance your car’s finish will shine for many years to come.
Less maintenance
The slickness of the coated surface doesn’t allow dirt, break dust and tar to stick to your car’s paint, wheels or glass. This makes washing your vehicle less labor intensive and less frequent. Waxing is now obsolete.
Ceramic Pro Light
Light is often used as a top coat on 9H. It will enhance the hydrophobicity and will also add more color depth and shine to the surface. Light make 9H look amazing! Light can also be used as a stand-alone coating with the following characteristics:
• Durability up to 24 months
• 114 degrees hydrophobic Effect
• Weather & UV Resistance
• High Gloss Finish
• Advanced Chemical Resistance
• Oxidation & Corrosion Resistant
Ceramic Pro Sport
”SPORT” – Maintenance Coating was designed for Ceramic PRO 9H maintenance which is an easy to install solution. You can use ”SPORT” to maintain Ceramic PRO 9H to keep the super hydrophobic effect and also avoid the water spots. The install is easy. Sport can also be used as a stand-alone coating.
Wheel & Caliper
cleaning your rims will never be the same! The surface on the wheel or rim gets so smooth that Brake dust and other containments wont bond. Eventually dirt will stick but will come off extremely easy with the use of water and a towel.
Ceramic Pro Textile
Ceramic Pro Textile reduces the surface energy of textile or suede. When liquids come into contact with the fabric, it forms beads and simply roll off whilst keeping the textile substrate dry.
Ceramic Pro Plastic and Rubber
Ceramic Pro Plastic and Rubber is suitable for both interior and exterior. Coated surfaces with Ceramic Pro Plastic and Rubber will give a hydrophobic effect with wear resistance. The product works for both new and old products.
Ceramic Pro Leather
Ceramic Pro Leather has a super hydrophobic effect. Liquids spilled bead up on surface and can easily be wiped away. The UV protection prevents the leather to age. It makes old leather look new.
Ceramic Pro once cured, is measured to have hardness above 9H. Normal clear coat has hardness between 2H and 4H. The glass shield prevents minor scratches to your clearcoat and acts as a sacrificial layer. This preserves the original factory paint.
Any surface scratches that happen in the coating are easily removed with light polishing which will not weaken the integrity of the original clear coat. With Ceramic Pro your paint won’t fade or age due to the UV protection in the glass coating.
Glossy, slick and self-cleaning This nano technology allows the Ceramic nanoparticles to fill the smallest pores in the paint which makes the Ceramic Pro glass shield shiny, smooth and extremely slick or hydrophobic. Ceramic Pro dramatically lowers the surface tension preventing environmental
contaminants such as: bird droppings, bugs, dirt, tar and graffiti paint from bonding to the surface. Water easily removes dirt from the surface by encapsulating it while rolling off the surface. This is called the self-cleaning effect.
Permanent protection Ceramic Pro 9H is a one-time application if maintained correctly. Once the Ceramic Pro glass shield has cured it can only be removed through abrasion like wet sanding. This puts Ceramic Pro in a category by itself, compared to sealants or waxes that degrade quickly.
HAVE YOUR INVESTMENT PROTECTED TODAY
